Last weekend was very successful. I have finished many goals on my endless to do list.
Because my car eats almost whole family budged, I have decided to recycling maximum of used materials.

On this picture are bitumen sheets glued on both sided tape used in my old front doors.....

and installed back in my left sliding doors.

Then was second soft foam layer applied.

And finally third layer from factory damping material.

On this image are left sliding doors finished.

After that I have applied soft foam layer on the drivers doors.

Third layer on both front doors are made from 2mm thick metal sheet with factory damping material glued together and kick bass pods made from MDF. On the lower half sealed with common bitumen tape.

Then I have added one additional layer off piping thermo isolating tape on front doors wiring harnesses. I hope this will help me to reduce rattling noises to minimum.

The third layer is secured on the front doors using aluminum rivets.  

Tuesday

At the morning I've started with adding both sided tape on factory damping foil for the right sliding door.

Here is original factory damping foil on its place.

Right sliding door finished. Looking like new :-)

On this picture is first dumping layer made from STP silver,  2mm thick bitumen foil with aluminum
.

After the lunch was added second layer, the same soft foam as on the right sliding doors.

Monday

Today I've been working on noise deadenning of right passenger sliding doors. I have used what left from my previous car. First layer was made from bitumen sheets.

The second layer is from 2cm thick soft foam.

DAY 1

Hello everybody,
today is my day 1 on this web, so please be patient with me and please keep in mind that I don't have any English education. I will add many pictures of my hobby (customizing my cars), my thoughts an so .